综述了PTFE和Nafion在PEMFC催化层中的应用,分析了粘结剂对催化层三相通道的改善、催化层的稳定性、催化剂的有效利用率和负载量等的影响,总结了对粘结剂在催化层中的含量与分布、催化层的厚度等工艺参数的优化,并讨论了进一步优化催化层结构的方向.
作 者：王洪红 潘牧 唐浩林 WANG Hong-hong PAN Mu TANG Hao-lin 
作者单位：武汉理工大学材料复合新技术国家重点实验室,湖北,武汉,430070
刊 名：电池  ISTIC PKU
英文刊名：BATTERY BIMONTHLY
年，卷(期)：2007 37(2)
分类号：TM911.42
关键词：PEMFC   催化层   粘结剂   PTFE   Nafion 
机标分类号：TM9 O64
机标关键词：催化层结构粘结剂有效利用率含量与分布优化工艺参数稳定性负载量催化剂综述应用通道厚度
基金项目：国家自然科学基金
DOI：

参考文献(25条)
1.Tuber K.Pocza D.Hebling C Visualization of water buildup in the cathode of a transparent PEM fuel cell 2003(2)
2.马海鹏.张华民.胡军.才英华.衣宝廉 PEMFC阴极排水的研究 [期刊论文] -电池2006(4)
3.程晓亮 质子交换膜燃料电池催化剂组成和结构对催化剂利用率和电极性能的影响 [学位论文] 1999
4.Sasamoto S.Shibata M.Watanabe M Process of preparing electrode for fuel cell 1990
5.Wilson M S.Gottesfeld S Thin-film catalyst layers for polymer electrolyte fuel cell electrodes 1992(1)
6.Cleghorh S J C.Ren X.Springer T E PEM fuel cells for transportation and stationary power generation applications 1997(12)
7.Chun Y G.Kim C S.Peck D H Performance of a polymer electrolyte membrane fuel cell with thin film catalyst electrodes 1998(1-2)
8.Nakakubo T.Shibata M.Yasuda K Membrane electrode assembly for proton exchange membrane fuel cells prepared by sputter deposition in air and transfer method 2005(12)
9.Passalacqua E.Lufrano F.Squadrito G Influence of the structure in low-Pt loading electrodes for polymer electrolyte fuel cells 1998(24)
10.Shao Z G.Lin W F.Christensen P A Ti mesh anodes prepared electrochemical deposition for the direct methanol fuel cell 2006(13)
11.Lee J.Seo J.Han K Preparation of low Pt loading electrodes on Nafion (Na+)-bonded carbon layer with galvanostatic pulses for PEMFC application 2006(1)
12.蒋淇忠.马紫峰.Oumarou Savadogo 直接涂膜技术用于质子交换膜燃料电池膜电极制备 [期刊论文] -化工学报2004(3)
13.Cheng X L.Yi B L.Han M Investigation of platinum utilization and morphology in catalyst layer of polymer electrolyte fuel cells 1999(1)
14.Passalacqua E.Lufrano F.Squadrito G Nafion content in the catalyst layer of polymer electrolyte fuel cells:effects on structure and performance 2001(6)
15.Antolini E.Giorgi L.Pozio A Influence of Nafion loading in the catalyst layer of gas-diffusion electrodes for PEFC 1999(2)
16.Sergel G.Appleby A J Recent progress in performance improvement of the proton exchange membrane fuel cell (PEMFC) 2002(1)
17.Thangamuthu R.Lin C W Preparation of gas diffusion electrodes using PEG/SiO2 hybrid materials and the effect of their composition on microstructure of the catalyst layer and on fuel cell performance 2006(1)
18.Yu H M.Ziegler C.Oszcipok M Hydrophillcity and hydrophobicity study of catalyst layers in proton exchange membranefuel cells 2006(7)
19.赵培.木士春.潘牧.袁润章 PEMFC组件CCM制备方法的评述 [期刊论文] -电池2005(6)
20.Boutonnet M.Kizling J.Stenius P The preparation of monodisperse colloidal metal particles from microemulsions 1982(3)
21.Escribano S.Aldeber P.Pineri M Volumic electrodes of fuel cells with polymer electrolyte membranes:electrochemical performances and structural analysis by thermoporometry 1998(14-15)
22.Raistrick I D Electrode assembly for use in a solid polymer electrolyte fuel cell 1989
23.Gharibi H.Zhiani M.Mirzaie R A Investigation ofpolyaniline impregnation on the performance of gas diffusion electrode (GDE) in PEMFC using binary of Nafion and polyaniline nanofiber 2006(2)
24.王洪红.唐浩林.肖立奇.潘牧 亲疏水性可调的燃料电池催化层的制备与表征 [期刊论文] -武汉理工大学学报2006(z1)
25.Zhang X W.Shi P F Dual-bonded catalyst layer structure cathode for PE M FC 2006(8)

阅读地址：http://d.wanfangdata.com.cn/Periodical_dc200702029.aspx