Standard(标准品)
FEATURES(特性)
SPECIFICATIONS
RIPPLE CURRENT MULTIPLIER(纹波电流系数)
PART NUMBER SYSTEM(产 品编码)(EXAMPLE:250V330μF)
Frequency Coefficient(频率系数)
1. Directly mountable on printed circuit board without holders.
可直接安装在印刷电路板上
2. Smaller in sizes than ordinary capacitors.
比普通电容器的体积要小
3. Terminal spacing fixed at 10mm for PC board plug in.
引出端间距为10mm
4. Aluminum case designed with explosion-proof vent.
铝外壳上设计有防爆装置
Item Performance Characteristics
Operating Temperature Range -40 to +85℃
10 to 250V 315 to 500V
10
160 ~ 250
10 ~ 100 160 ~ 250 315 ~ 385 400 ~ 450 500
4 3 5 8 8
15 15 -- -- --
315 ~ 420 450 ~ 500
16 25 35 50 60 80 100
0.55
0.15 0.15 0.20
0.50 0.45
(rated capacitance)-333000μF
10000μF
0.40 0.35
×0.1
0.30 0.25 0.20
56 to 82000μF
after 5 minutes application of rated working voltage at +20℃
Working Voltage(V)
For capacitance value＞33000μF,add following calculated value:
Impedance ratio max. At 120Hz
Working Voltage(V)
Testing time :
Testing temp :
Testing condition :
Leakage current :
Cap. change :
tan δ :
At 85℃ no voltage applied after 1000 hours and then being stabilized at 20℃ the capacitors shall meet the following limits
JlS C - 5101 ( lEC 60384 )
2000 hours
+85
Rated DC working voltage with the
max. Ripple current
℃
Post test requirements at +20
Leakage current :
Cap. change :
tan :
℃
δ
lnitial specifide value
lnitial specifide value
200% of lnitial specifide value
150% of lnitial specifide value
within± 20% o f in itial m easured v alue
within± 15% o f in itial m easured v alue
Z-25℃/Z+20℃
Z-40℃/Z+20℃
tanδ(max.)
tanδ(max.)
Working Voltage(V)
I 3 CV (μA)
±20%(120HZ,+20℃)
-25 to +85℃
Rated Working Voltage Range
Nominal Capacitance Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
tan δ(120HZ,+20℃)
Low Temperature Characteristics
High Temperature Loading
Shelf Life
Others
Frequency multiplying factor:
Freq.(Hz) 60
0.90
0.80
0.80
120
1.00
1.00
1.00
1k
1.15
1.15
1.15
10 ~50k
1.25
1.47
1.47
10 ~ 100V
160 ~ 250V
315 ~ 500V
If capacitors are used to filter circuits at a frequency other than 120Hz,the
maximum ripple current must be multiplied by the figure shown in the table below.
23